KAJIAN DFT UNTUK MENGHITUNG KONSTANTA KISI DAN KERAPATAN MATERIAL MEGNETITE (Fe3O¬4)

Authors

  • Lily Maysari Angraini Program Studi Fisika, Fakultas Matematika dan Ilmu Pengetahuan Alam, Universitas Mataram
  • I Gusti Ngurah Yudi Handayana Program Studi Fisika, Fakultas Matematika dan Ilmu Pengetahuan Alam, Universitas Mataram
  • I Wayan Sudiarta Program Studi Fisika, Fakultas Matematika dan Ilmu Pengetahuan Alam, Universitas Mataram
  • Marzuki Marzuki Program Studi Fisika, Fakultas Matematika dan Ilmu Pengetahuan Alam, Universitas Mataram

Keywords:

aspal modifikasi, getah pinus, limbah styrofoam, kinerja perkerasan

Abstract

The Magnetite (Fe3O4) has become a fascinating material due to its advanced applications. Understanding the nature of magnetite (Fe3O4), it is necessary to calculate some of the physical parameters. In this paper, we calculated the crystal constant and the volume of density using density functional theory. To validate calculation, practical solution, and numerical results of crystal constant value and density show accurate results. The structure of fcc- crystal magnetite and system of density and isopotential have successfully been in the design.

References

Huang, S. C.; Salomon, D. and Haddock, J. E., 2012. : Work-shop Introduction, Transportation Research Circular E-C165, p. 1, Transportation Research Board, Washington, D.C.

Yuniarti, R., 2015. Performance of Bio-Flux Oil as Modifier of Buton Granular Asphalt in Asphalt Concrete-Wearing Course, Journal of JSCE (Japan Society of Civil Engineers), Vol. 3 No.1 p.33-44.

Yuniarti, R., 2019. Resistance to Degradation of Porous Asphalt Mixture Using Pine Resin as Asphalt Modifier, Jordan Journal of Civil Engineering, Vol. 13 No.1 p.113-123.

Yildirim, Y.; 2007. Polymer Modified Asphalt Binders, Construction and Building Materials, 21(1):66-72.

Nassar, I. M.; Kabel, K. I.; Ibrahim, I. M.; 2012. Evaluation of the Effect of Waste Polystyrene on Performance of Asphalt Binder, ARPN Journal of Science and Technology, Vol. 2, No. 10, pp. 927-935.

Wen, G.; Zhang, Y.;, Zhang, Y.; Sun, K.; Fan, Y.; 2002. Rheological Characterization of Storage-Stable SBS-Modified Asphalts, Polymer Testing, 21(3):295-302.

Airey, G.D.; 2003. Rheological Properties of Styrene Butadiene Styrene Polymer Modified Road Bitumens, Fuel, 82(14):1709-1719.

Fang, C.; Jiao, L.; Hu, J.; Yu, Q.; Guo, D.; Zhou, X.; Yu, R.; 2014. Viscoelasticity of Asphalt Modified With Packaging Waste Expended Polystyrene, Journal of Material Sciences & Technology, Vol. 30 No.9, pp. 939-943.

Baker, M.B.; Abendeh, R.; Abu-Salem, Z.; Khedaywi, T.; 2016. Production of Sustainable Asphalt Mixes Using Recycled Polystyrene, International Journal of Applied Environmental Sciences, Vol. 11 No. 1, pp. 183-192.

Direktorat Jenderal Bina Marga, 2013. Spesifikasi Umum 2010 Revisi III. Kementerian Pekerjaan Umum, Jakarta.

Yuniarti, R.; Hasyim; Rohani; Anwar, S.N.R.; Saptaningtyas, R.S.; 2018. Karakteristik Campuran Asphalt Concrete Wearing Course Menggunakan Aspal Modifikasi Getah Pinus Dan Serbuk Limbah Kaca, Prosiding Seminar Nasional Sainstek 2018, Mataram.

Zhu, J.; Birgisson, B.; Kringos, N.; 2014. Polymer Modification of Bitumen: Advances and Challenges, European Polymer Journal, 54: 18-38.

Published

2021-01-25

Issue

Vol. 3 (2021): Prosiding SAINTEK

Section

Articles